Columbia Basin heat
Summer pours need earlier starts and tighter finishing windows so the surface does not flash-set before it is worked cleanly.
Pasco Concrete Contractor for Driveways, Repair & Flatwork
Cracked driveway, rough patio, or a concrete repair that keeps getting pushed back? If your search started with bulk concrete near me but you actually need concrete installed, Marco can scope the driveway, patio, slab, or repair before concrete is ordered.
Call directly
Pasco Concrete Contractor for Driveways, Repair, Patios, and Flatwork
Cracked driveway, rough patio, or a concrete repair that keeps getting pushed back? If your search started with bulk concrete near me but you actually need concrete installed, Marco can scope the driveway, patio, slab, or repair before concrete is ordered.
Pasco concrete details that change the job
Concrete work here is not the same as a generic west-side Washington pour. Heat, dust, irrigation, and fast growth all show up in the estimate.
Wind-blown sand
Dust and sand abrade exposed surfaces and make sealing, finish choice, and curing discipline matter.
Irrigation-adjacent lots
Localized moisture changes can weaken the base if drainage and compaction are not checked before concrete goes down.
Fast-growing neighborhoods
Older cracked driveways stand out next to newer construction, which makes driveway replacement one of the highest-intent calls.
Why Pasco driveways fail early
Most bad concrete outcomes here start before the pour: weak base prep, poor timing in heat, or drainage that keeps moving under the slab.
- 100°F+ summer heat shortens the working window and can leave a rough or weak surface when the pour is not timed correctly.
- Irrigation runoff and localized drainage can soften the base under driveways, patios, and side-yard slabs.
- Seasonal expansion, contraction, and wind abrasion make control joints and surface finish more important than they look on day one.
How can you contact us today?
Need a concrete quote? Call (509) 516-2182 or use the form. Tell us the problem, where you are, and what kind of help you need. Calling is usually the simplest way to talk through the issue.
Click To Call
(509) 516-2182For a faster concrete estimate, include:
- Driveway, patio, walkway, slab, stamped concrete, or repair
- Approximate size or number of car widths if you know it
- Whether old concrete needs demolition and haul-away
- Cracking, settling, drainage, or irrigation runoff details
- Photos if you have them and the best time for a callback
About Pasco Concrete Co
Pasco and Franklin County have been my concrete service area for more than five years. My work includes new pours and repairs throughout the listed Tri-Cities coverage area.
I started this company because Columbia Basin concrete has its own rules. Pasco summers regularly push above 100°F, wind-blown dust and sand abrade exposed surfaces, and irrigation-adjacent properties can have soil moisture changes that do not show up on a generic quote sheet.
Every job starts with the base and the timing. A driveway poured in July needs a different schedule than one poured in April. A property near irrigation runoff needs a different base conversation than a dry interior lot. I check those details before quoting the work.
Every job I run myself. I'm on site for the estimate and the pour, I manage the finishing window in Columbia Basin heat, and I don't consider a job done until the surface looks right, the edges are clean, and the slab is set up for the conditions it will actually face.
Call with the surface, location, and timing, or send those details through the form. I handle the reply myself.
Why Choose Marco in Pasco
Kennewick Concrete King has a dedicated Pasco page - they know the growth story and the local landmarks. King Concrete of Kennewick also covers Pasco. pasco-concrete.com and Angela's Construction are also active. Here's what makes Marco different:
Pasco-first, not Kennewick routing. Kennewick Concrete King and King Concrete both route from Kennewick across the Columbia River to Pasco jobs. Marco lives and works in Pasco, with a primary service area within 15 minutes.
Columbia Basin heat management without the Kennewick handoff. Kennewick Concrete King and King Concrete of Kennewick are real Tri-Cities options and both discuss local concrete conditions. The practical difference with Marco: he is Pasco-based, handles the estimate and the pour himself, and reviews heat timing and irrigation-adjacent base conditions before concrete is ordered.
Fast-growing market knowledge. Pasco is one of the fastest-growing cities in Washington state. New construction lots, irrigation district parcels, and older residential neighborhoods all have different soil and base conditions. Marco checks base conditions at every estimate - irrigation-adjacent properties in particular can have unexpected moisture variability that affects how the base needs to be prepared.
Marco is on every job. Not a crew that rotates. Marco is on the estimate and on the pour.
Locally owned, free estimates, and five-plus years of hands-on Pasco and Franklin County concrete work.
What Does Concrete Work Cost in Pasco, WA?
Concrete pricing in Pasco depends on project type, square footage, finish, demolition, and how much base prep is involved. Columbia Basin summer heat can affect scheduling and curing management. Here are honest ballpark planning ranges for residential projects:
- Driveway replacement (2-car): $4,000–$8,500
- Patio - broom finish: $2,000–$5,500
- Patio - stamped concrete: $4,500–$9,000
- Walkway or side-yard path: $800–$2,500
- Garage slab or shed pad: $1,200–$4,000
- Concrete repair (isolated): $300–$800
- Partial section replacement: $600–$2,000
These ranges assume standard residential access and typical Pasco-area base conditions. Properties with difficult access, significant demolition, irrigation-adjacent base correction, or large prep needs may run higher - I'll tell you upfront at the estimate.
I give free estimates - call (509) 516-2182 or fill out the form and I'll give you a straight number based on your actual project.
Concrete Services in Pasco, WA
Concrete work in Pasco depends on project type, square footage, finish, demolition needs, base condition, and how Columbia Basin heat affects the pour schedule.
Driveway Installation and Replacement
Driveway replacement is available in Pasco and Franklin County. Driveways here age under intense summer sun, wind-blown dust, and seasonal expansion and contraction. In fast-growing neighborhoods, an older cracked driveway stands out even more when new construction is going up nearby. A replacement starts with the existing concrete removed and hauled, the base assessed and corrected if needed, and fresh concrete poured to the right thickness with proper control joints placed so future cracking happens where it should rather than randomly across the surface. Broom finish is standard for driveways - practical traction that handles Columbia Basin dust and winter moisture. In Pasco's Columbia Basin climate, driveway pours require specific timing management. Summer heat accelerates concrete set - a pour that starts at 10 AM in July can reach the point of no return before finishing work is complete if the crew isn't working fast and efficiently. Marco schedules large flatwork for early morning starts during the summer season and uses retarding agents on jobs where timing is critical. The result shows in the finished surface.
Best for: driveways with widespread cracking or settling, 15-20 year old surfaces, garage aprons, driveway widening, replacement work in fast-growing Pasco neighborhoods
See our Pasco driveway page →See our driveway replacement page →
Patio and Backyard Slabs
Pasco's dry summer evenings make backyard patios practical for outdoor living. Patio concrete here needs clean layout, proper control joints, and timing that accounts for summer heat. Fresh concrete above 90°F can set too quickly if the mix, start time, and finishing schedule are not managed. Summer pours are scheduled earlier and finished efficiently so the slab cures cleanly instead of showing surface defects by the end of the season.
Best for: new backyard patio installations, replacing old cracked patio slabs, outdoor entertainment areas, covered patio slabs adjacent to the house
Walkways and Side-Yard Concrete
Front walkways, side-yard access routes, and utility paths that connect the driveway, garage, and backyard. In Pasco, walkway concrete benefits from the same base attention as driveways because irrigation moisture and localized runoff can affect smaller slabs too. Control joints at correct intervals let concrete move predictably rather than randomly, and surface finish needs to account for dust, winter slick spots, and daily use.
Best for: front walkway replacement, side yard access paths, connecting driveway to entry or garage, utility and equipment pads on side yards
Stamped Concrete
Stamped concrete patios and walkways are popular for Pasco homeowners who want the look of stone or pavers without the same maintenance. The Columbia Basin's dry landscape suits warm earth tones, ashlar slate, and cobblestone-style patterns. Summer pour management is especially important on stamped concrete - the stamp pattern needs to be applied at exactly the right time in the finishing window, and Pasco heat compresses that window significantly. Marco times pours early and uses retarding agents on hot days when needed.
Best for: backyard patio upgrades, front walkway curb appeal improvement, homeowners comparing stamped concrete to pavers
See our stamped concrete page →Concrete Repair
Not every cracked Pasco driveway needs full replacement. Isolated cracks where the slab is not moving and the base is still solid may be repair candidates - partial section saw-cut and replacement, crack routing and filling, or joint resealing can extend useful life. The honest assessment: if cracks are widespread, sections are settling unevenly, or the slab is over 20 years old in Pasco's climate, repair is usually just buying time before replacement.
Best for: isolated cracks without slab movement, surface damage, joint deterioration, specific section replacement on otherwise sound driveways
Slabs and Miscellaneous Flatwork
Garage slabs, shed pads, carport pads, utility equipment pads, and residential flatwork that doesn't fit neatly into driveway or patio categories. Same base prep and pour standards as larger jobs - small slabs in Pasco still need compaction and control joints or they crack and settle.
Best for: garage floor replacements, detached garage and shed pads, carport slabs, RV and boat pad installations, utility and equipment pads
Repair, replace, or start fresh?
A quick look usually separates cosmetic cracking from concrete that is already past the point of a useful patch.
Repair may make sense
- One or two isolated cracks
- No major settling or heaving
- The base still feels solid
- You mainly need a section cleaned up
Replacement is usually smarter
- Widespread cracking
- Sunken or uneven sections
- Old driveway with repeated patching
- Drainage or irrigation issues under the slab
Start fresh for new use
- Driveway widening
- New patio or walkway
- Shed, garage, RV, or equipment pad
- Stamped concrete upgrade
If you are not sure, call first. The estimate should tell you whether repair is real or just buying a little time.
Five years pouring concrete across Pasco and Franklin County means I know what Columbia Basin summers do to a pour - the working window in a Tri-Cities July is half what it is in Seattle, and concrete that isn't placed and finished fast enough in that heat will show it for years. Call to confirm current estimate timing. If the driveway is cracked, the patio is past repair, or you're ready for a new project, call or use the form with the address and project details.
What you can expect
No fake review wall or vague contractor promises. The job starts with a real estimate and clear scope before concrete is ordered.
Direct estimate
Marco reviews project type, access, demolition, base condition, and finish before giving a number.
Clear scope
You know what is included: prep, thickness, finish, joints, haul-away, and timing.
Weather-aware scheduling
Hot, windy, or cold conditions are handled with schedule changes or pour adjustments instead of forcing bad timing.
Scope and safety notes
- Major structural movement, retaining-wall failure, or foundation cracking may need an engineer or foundation specialist before flatwork is quoted.
- Concrete around utility lines, pool equipment, or drainage systems may need locates or coordination before demolition starts.
- Hot-weather pours may be scheduled early in the day or moved when wind and heat would hurt the finish.
More local concrete pages
Specific service and nearby-area pages for homeowners who want a more focused answer before they call.
Concrete Driveways in Pasco, WA
Concrete driveway installation and replacement for Pasco homeowners dealing with cracking, settling, drainage issues, or surface wear from Columbia Basin heat and wind-blown sand.
Open page →Concrete Driveway Replacement in Pasco, WA
Full driveway tear-out and replacement when patching no longer makes sense. Call (509) 516-2182.
Open page →Stamped Concrete in Pasco, WA
Stamped patios, walkways, and upgraded outdoor concrete with timing built around Pasco heat. Call (509) 516-2182.
Open page →Concrete Contractor in Kennewick, WA
Tri-Cities concrete coverage for Kennewick driveways, patios, slabs, and repairs. Call (509) 516-2182.
Open page →Concrete Contractor in Richland, WA
Concrete driveways, patios, stamped concrete, and residential flatwork across Richland. Call (509) 516-2182.
Open page →Concrete Contractor in West Richland, WA
Select-area concrete estimates for West Richland driveways, patios, slabs, stamped concrete, and repairs. Call (509) 516-2182 to confirm availability.
Open page →Concrete Contractor in Connell, WA
Case-by-case concrete estimates for Connell driveways, patios, slabs, stamped concrete, and repairs. Call (509) 516-2182 to confirm route availability.
Open page →Concrete Contractor in Prosser, WA
Select larger concrete-project estimates in Prosser when route and timing align. Call (509) 516-2182 to confirm availability.
Open page →Best Concrete Contractor in Pasco, WA
Comparison-style page for Pasco homeowners deciding who to call for concrete work. Call (509) 516-2182.
Open page →Epoxy Flooring in Pasco, WA
Epoxy Flooring guidance for Pasco homeowners, with local conditions, price ranges, process, alternatives, and five direct answers.
Open page →Garage Floor Coating in Pasco, WA
Garage Floor Coating guidance for Pasco homeowners, with local conditions, price ranges, process, alternatives, and five direct answers.
Open page →Concrete Patio in Pasco, WA
Concrete Patio guidance for Pasco homeowners, with local conditions, price ranges, process, alternatives, and five direct answers.
Open page →Concrete Repair in Pasco, WA
Concrete Repair guidance for Pasco homeowners, with local conditions, price ranges, process, alternatives, and five direct answers.
Open page →Concrete Leveling in Pasco, WA
Concrete Leveling guidance for Pasco homeowners, with local conditions, price ranges, process, alternatives, and five direct answers.
Open page →Concrete Resurfacing in Pasco, WA
Concrete Resurfacing guidance for Pasco homeowners, with local conditions, price ranges, process, alternatives, and five direct answers.
Open page →Which common questions have practical answers?
What kinds of concrete projects do you quote?
Available services include driveways, patios, slabs, walkways, stamped concrete, and other residential flatwork projects around the home.
Can I ask about one section first?
Yes. Some jobs are full driveway or patio replacements, others are a single section, walkway, apron, or combined scope.
What should I include in the request?
Property address, what type of concrete work is needed, approximate size if known, whether existing concrete needs to be demolished, and whether irrigation runoff or drainage issues are present.
How much does concrete work cost in Pasco, WA?
Driveway replacement runs $4,000–$8,500. Patios run $2,000–$5,500. Stamped concrete runs $4,500–$9,000. Walkways run $800–$2,500. Free estimates - call (509) 516-2182.
Why does concrete crack in Pasco?
Pasco concrete deals with 100°F+ summer heat, seasonal expansion and contraction, wind-blown sand abrasion, and localized base moisture issues near irrigation runoff. Poor base prep makes all of those problems worse.
What is different about pouring concrete in the Columbia Basin?
The heat compresses the working window. Summer pours need early starts, fast placement, careful finishing timing, and sometimes retarding agents for larger flatwork.
Do you do stamped concrete?
Yes. Stamped concrete patios and walkways are common in Pasco. Summer heat makes timing especially important because the stamp pattern must be applied in the right finishing window.
Do you cover areas outside Pasco?
Yes. Service coverage includes Kennewick and Richland, with select jobs in West Richland, Connell, Prosser, and nearby Franklin County communities based on project size and schedule.
How long does concrete take to cure in Pasco summer heat?
Concrete is usually walkable in 24–48 hours and driveable in about 7 days, with full cure around 28 days. Hot, dry weather requires curing attention so the surface does not dry too fast.
What time of year is best for concrete work in Pasco?
Spring and fall offer the easiest curing temperatures. Summer work is common with early starts and heat management. Winter pours require temperature precautions.
Do you deliver bulk concrete near me?
Pasco Concrete Co is an installed concrete contractor, not a bulk ready-mix delivery yard. If you searched for bulk concrete near me because you need a driveway, patio, slab, walkway, or repair poured at a Pasco home, call Marco and he can scope the installed job.
Is Pasco Concrete Co a concrete batch plant or concrete by the yard supplier?
No. If you need raw ready-mix, a batch plant, or concrete by the yard delivered for a do-it-yourself pour, you need a supplier. If you need the concrete project installed for a driveway, patio, slab, walkway, stamped concrete, or repair, Pasco Concrete Co can quote that installed work.
Service Area - Pasco and the Tri-Cities, WA
Pasco is the core market, with Kennewick, Richland, West Richland, Connell, Prosser, and nearby Franklin County communities covered when route and project scope fit.
Pasco (Primary)
Primary service area for driveway replacement, patios, stamped concrete, repairs, and residential flatwork. ZIP codes: 99301, 99302.
Kennewick
Regular Tri-Cities coverage for concrete driveways, patios, slabs, and repair work. ZIP codes: 99336, 99337, 99338.
Kennewick concrete page →Richland
Service coverage across the Columbia River for driveway, patio, and stamped concrete projects. ZIP codes: 99352, 99354.
Richland concrete page →West Richland
Covered for larger residential flatwork, driveway replacement, patio, and stamped concrete projects. ZIP code: 99353.
West Richland concrete page →Connell
Covered case by case based on schedule and project scope. ZIP code: 99326.
Connell concrete page →Prosser
Covered case by case for larger concrete projects when route and timing align. ZIP code: 99350.
Prosser concrete page →Not sure if we cover your address? Call (509) 516-2182 or use the quote form. Include your city and project type and we will give you a straight answer on availability.